Pooline Pool Conditioner Cyanuric Acid 5lb. TNJ-11947 – 2 Pack

$66.42

Item ID: 209621

Out of stock

Stock is Correct,
Even if you contact us to check.😀

New Product

SKU: 11947-Bag-2PK
Categories: ,

Swimming Pool Water Stabilizer Conditioner Cyanuric Acid 5lb. by Pooline TNJ-11947

Conserves Chlorine in Swimming Pools

Pooline Swimming Pool Water Stabilizer Conditioner Cyanuric Acid reduces chlorine consumption in outdoor swimming pools due to ultraviolet radiation from the sun. It will stabilize the chlorine residual for both liquid and dry chlorinating compounds.

Pooline Swimming Pool Water Stabilizer Conditioner Cyanuric Acid CONSERVES CHLORINE IN SWIMMING POOLS

Pooline Swimming Pool Water Stabilizer Conditioner Cyanuric Acid reduces chlorine consumption in outdoor swimming pools due to ultraviolet radiation from the sun. It will stabilize the chlorine residual for both liquid and dry chlorinating compounds.

Pooline Swimming Pool Water Stabilizer Conditioner Cyanuric Acid DIRECTIONS FOR USE:

Adjust pH of pool water to 7.2-7.6 with Soda Ash or Muriatic Acid or similar products. Add Pooline Swimming Pool Water Stabilizer Conditioner Cyanuric Acid at the rate of five (5) pounds per 20,000 gallons of pool water in unstabilized or freshly filled pools. This dosage will provide 30 ppm conditioner (cyanuric acid).If the pool is already stabilized or you have been using stabilized chlorinating chemicals, check conditioner (cyanuric acid) level before adding Pooline Swimming Pool Water Stabilizer Conditioner Cyanuric Acid. Use a test kit designedfor this purpose. If you do not have a test kit for conditioner (cyanuric acid), have water checked by a pool service technician, or at a professional pool supply store. The ideal conditioner (cyanuric acid) level is 60?Çö80 ppm.The best way to add Pooline Swimming Pool Water Stabilizer Conditioner Cyanuric Acid is slowly through the skimmer, while the filter and pump are running. You can also make up a slurry in a large plastic bucket and add directly to the pool with the pump and filter running. Be certain to clean filter prior to addition of Pooline Swimming Pool Water Stabilizer Conditioner Cyanuric Acid, and run filter and pump for 4?Çö6 hours after addition.Chlorinate in the usual manner per label instructions. Check the level of conditioner (cyanuric acid) annually.

Pooline Swimming Pool Water Stabilizer Conditioner Cyanuric Acid INGREDIENTS:

ACTIVE INGREDIENTS: Cyanuric Acid : 98.50%INERT INGREDIENTS: : 1.50%TOTAL INGREDIENTS: : 100.00%

UPC: 818796012943

Reviews

There are no reviews yet.

Be the first to review “Pooline Pool Conditioner Cyanuric Acid 5lb. TNJ-11947 – 2 Pack”

Your email address will not be published. Required fields are marked *

Skip to content