Pentair 2 in. Adapter Kit CVA-24T To Ortega Valve OVA2

CVA-24T To Ortega Valve 2 in. Adapter Kit made by Pentair OVA2

APPLICATION:

Used to adapt Compool CVA-24T Valve Actuator to 2 Ortega 3-port valve.

KIT INCLUDES:

• Adapter Plate
• Cover O-ring Seal
• Cover O-ring Seals (3ea.)
• Shaft Coupling
• Shaft Coupling Mounting Screws (2 ea.)
• Valve Handle
• Valve Knob

INSTALLATION:

1. Remove handle, cover, stop screw and o-ring seals from OrtegaValve. Save cover screws.
2. Insert new O-ring Seals into bottom of Adapter Plate. LubricateSeals with Compool Silicone Grease. In retrofit applications, itis advisable to remove the valve diverter and lubricate diverterseal at this time.
   • Valves should be inspected and serviced at lease once a year. The valve diverter should be well lubricated, the O-ring seals should be intact, and the diverter should fit snugly and rotate smoothly
3. Mount Adapter plate to valve, using the existing cover screws.
4. Attach Shaft Coupling to valve shaft. ensure that pointer isoriented in the direction of theopenvalve port. SecureCoupling with Mounting Screws. Tighten Screws completely.
5. Attach Valve Handle to Valve Actuator, and secure with ValveKnob.
6. Connect cable between Valve Actuator, and Power Center.Line-up and attach Valve Actuator to Shaft Coupling in thisposition, reverse the cable plug on the side of the ValveActuator so that the Actuator rotates to the correct position.
7. Secure to Adapter plate with Valve Actuator Mounting Screws.

Pentair Adapter Kit, Size: 2 Inch, Includes: Adapter Plate, Cover O-Ring Seal, Shaft Coupling, Shaft Coupling Mounting Screws, Valve Handle, Valve Knob, For Use With: CVA-24T to Ortega(R) Valve, Actuator