IPS Weld-On PVC 746 Pool Heavy Gray Glue 1/2 Pint 13569

IPS Weld-On PVC 746 Swimming Pool Plumbing Heavy Gray Glue 0.5 Pint 8 Fl. Oz  13569

IPS Weld-On PVC 746 Pool Heavy Gray Glue 1/2 Pint 13569 General Description:

WELD-ON® 746™ Pool Heavy is a clear or gray, low VOC emission, heavy bodied, medium setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings, including Schedule 80, with interference fit through 12 inch (315 mm) diameter. Can be used on non-pressure applications through 18 inch (450mm) diameter. It has good gap filling properties and is recommended for solvent cementing joints where a sizable gap exists between pipe and fitting – e.g. large pipe sizes – and when more working time is required in warm weather.

IPS Weld-On PVC 746 Pool Heavy Gray Glue 1/2 Pint 13569 Application:

WELD-ON 746 Pool Heavy is for use on all types of PVC plastic pipe Pool & Spa applications. Detailed directions on making solvent cemented joints are printed on the container label. An installation DVD/CD covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer. NOTE: WELD-ON solvent cements must never be used in a PVC system using or being  tested by compressed air or gases; including air-over-water booster.