EP Epoxy Swimming Pool and Spa Paint White 908131101 made by Ramuc
This premium low film build epoxy coating is formulated to provide ease of application and excellent coverage rates.
Ramuc EP Epoxy Swimming Pool and Spa Paint White 908131101 facts:
- Protects previously painted epoxy or unpainted concrete/plaster/fiberglass/gelcoat swimming pools and spas
- Excellent choice for waterpark facilities, including slides
- High gloss, tile-like finish provides ease of cleaning
- Abrasion and chemical-resistant
- Self-priming
- Two-coat system
- VOC compliant everywhere in US and Canada
- Use SKID-TEX Additive to achieve a non-slip surface
Ramuc EP Epoxy Swimming Pool and Spa Paint White 908131101 Application:
- Roller
- Brush
- Spray
Ramuc EP Epoxy Swimming Pool and Spa Paint White 908131101 Coverage:
- Up to 450 sq. ft./gallon on recoats
Ramuc EP Epoxy Swimming Pool and Spa Paint White 908131101 Dry Time:
- Outdoor pool 5-7 Days to fill pool
- Indoor pool 10-14 Days to fill pool
- To Recoat: 12-72 Hours
Eight-hour ‘pot life’ when component A and B are mixed together
Ramuc EP Epoxy Pool Paint
Ramuc EP Epoxy Swimming Pool and Spa Paint White 908131101 Application Information:
Compatibility: For compatibility purposes, the existing paint on previously painted surfaces of a pool or spa should be determined before painting. Aged plaster should bechecked for integrity. Check for hollow or weak/crumbling plaster by using a ball-peen hammer or any other comparable method. Perform repairs on the plaster before painting.Use dark colors for accent painting only Dark colors can prematurely fade or blister, especially in chemically treated water.New concrete and plaster surfaces must be cured a minimum of 28 days prior to painting.Spray Information: Airless: 2000—2300 p.s.i. Tip Size: .0.33 -.0.43. Product should be thinned with Ramuc Thinner or xylene for proper atomization. Thin only up to state regulated VOC requirements.Coverage: 175—200 sq. ft. per gallon kit on bare, sand blasted or rough surfaces 400-450 sq. ft. per gallon kit on re-coats (Actual coverage will vary and is dependent upon the texture and profile of the surface.)Minimum dry film per coat: 1.7 mils dry (2.9 mils wet)Maximum dry film per coat : 2.0 mils dry (5.7 mils wet)Pot life— Use life: 8 hours @ 70º F and 50% relative humidityClean up: Ramuc Thinner or Xylenehttps://www.ramucpoolpaint.com/(800) 745-6756
Reviews
There are no reviews yet.