FAL8 Marlig Fix A Leak Spa & Hot Tub Leak Sealer 8 oz.

Fix A Leak For Spas and Hot Tubs 8 oz. made by Marlig FAL8

FIX-A-LEAK

• is a blended concentrated material designed to seal leaks in virtually any material,
• can be applied for leaks in the shell and works equally well in plumbing,
• will seal holes 1/8 in diameter,
• will form a long lasting seal,
• use 8 oz. per pool up to 1.000gallons.

DIRECTIONS:

Shake Well Before Using

1. Bypass FILTER MEDIA before adding FIX-A-LEAK to water.
2. With pump running, add FIX-A-LEAK slowly through skimmer or in front of any other suction intake.
3. FIX-A-LEAK is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension every 4-6 hrs. during circulation of water.
4. Continue to recirculate water until the leak has stopped.
5. After the leak has stopped, give it the proper time to cure (24-48 hrs.).You may then return to normal filtration.
6. Treatment can be repeated if necessary.NOTE: Never allow cartridges or DE elements to dry before they are cleaned.Rinse clean with water.It is advisable, if your spa is a foam insulated type and has been leaking for a long period of time:
7. Once you determine the leak has stopped, drain your tub.Properly wipe down the spa with a wet cloth, nothing abrasive.Allow to dry for 4-5 days to all FIX-A-LEAK to properly cure.